http://www.ebay.co.uk/itm/Box-of-45-Assorted-Mini-Wooden-HOUSES-Shapes-Craft-Embellishments-/322355461063?hash=item4b0de1fbc7:g:Q6oAAOSwEzxYS93D
When I mess about trying to decide where to put the tiniest and most insignificant of flat back gem I call it Fiddle Farting, hence the name of the blog!!!
Friday, 10 February 2017
Little Wooden House Christmas Card - Mark 2
Following on from yesterday’s card …….. I put my thoughts together, and this is what “occurred”, I really am not sure, OK, I will be honest, this hasn’t worked at all!!!
The card measures 5ins x 5ins and uses a hand cut, Kraft card blank as a base.
Adding the colour, despite being done very carefully, just looks crude and “unprofessional”, it hasn’t worked, the card doesn’t need it. However, I think adding a trail of translucent glitter through the snow has worked ……. The sentiment was handwritten using a fine liner pen which I think also works, but, could be presented a little better, by mat and layering ………. so it’s back to the drawing board yet again!
House embellishments came from e-bay
http://www.ebay.co.uk/itm/Box-of-45-Assorted-Mini-Wooden-HOUSES-Shapes-Craft-Embellishments-/322355461063?hash=item4b0de1fbc7:g:Q6oAAOSwEzxYS93D
http://www.ebay.co.uk/itm/Box-of-45-Assorted-Mini-Wooden-HOUSES-Shapes-Craft-Embellishments-/322355461063?hash=item4b0de1fbc7:g:Q6oAAOSwEzxYS93D
Thursday, 9 February 2017
Little Wooden House In The Snow Christmas Card
Well ……. goodness only knows where the original post for this card has disappeared to, and I really can’t face writing it all over again, so hopefully a couple of pictures will tell the story for me. The card measures 4ins x 4ins and uses a white linen effect, hand cut card blank as its base.
Originally I wasn’t 100% happy with this card and my intention was to experiment using Kraft card instead and perhaps adding colour and glitter.
Wednesday, 8 February 2017
Experimenting With The Idea Of Easter Jars–Not One Of My Best!!!!!
I think I really need to experiment a little more with this idea, inspired by some Easter jar ideas I have seen on Pinterest, what I have done just doesn’t seem to quite come together for me.
So I sat him on top of the jar instead, held in place with a foam pad, but I think, when/if I have another go, he should be glued there instead. I also need to cut a green paper/faux grass circle to stick on the jar lid too, and the ribbon, well I think that should be much thicker and probably green. So, all in all, I have got it all wrong ……. so it’s back to the drawing board, with a few other ideas ……….. but, at least I got to eat the sweets as I wrote this post, as they were in very grave danger of going stale!
The small Kilner type jar came from Home Bargains for just 59p.
….. and I thought the pack of flock rabbits from The Works (£1) would come in useful in the run up to Easter, either for this project or something else …… and as for the gummy carrots, (£1 from the Co-Op), well, they’re confectionery, so wouldn't go to waste!
The idea was to layer the sweets inside the jar, attractively, which is where I failed disastrously! I put Cadburys mini eggs at the bottom, then a layer of coiled, dark green, raspberry flavour laces (for the grass), but I think Poundland may sell a lighter green, apple flavour lace. However, I couldn't find a chocolate rabbit that fit, (too big or too small) so that’s where a flock one came in handy, sat sitting, among the gummy carrots ……. but, it looks a mess, the poor, panicking rabbit’s eyes says it all, he is definitely not happy being stuck in a jar!
Tuesday, 7 February 2017
Covered Satsuma Box
I have finally taken the plunge and put together a few bits and pieces to take up to the café where Iris and I like to “lunch” on a Wednesday. It was the very first place in Evesham that I went for a coffee and have been a regular ever since, with the owner Josi becoming a lovely friend.
Monday, 6 February 2017
January Furniture Show 2017 – Pictures of Ian Christopher’s Work
You may remember that I beat myself up a week or so ago because I was too busy/knackered to take many pictures of the hospitality areas I worked on with Ian Christopher and his team at the January Furniture Show 2017 at the NEC in Birmingham, well I now have some “official” pictures from Ian.
The first few are of the Speak Easy VIP Area which it all started as below, empty …….
….. and ended up looking like this …….
Ian designed everything, from the colours of the stand walls …..
…… to the posters and art work on the walls, the signage, the flooring …….
……. the lighting, the drapes ………
……. every single stick of furniture that had to be hired ….. even down to the mahooooooosive chandelier in the piano bar.
….. Ian’s plans were drawn to show exactly where everything had to go, for me the thought of it all makes my head spin. All I had to do was “stage” the props, and wire some gerbera and as I have said, that totally knackered me out!
Ian also designed the Willy Wonka and Western Areas that I never got a chance to see in their finished stage.
It really is a whole new world ……. If I had had the room, I would have been very tempted to smuggle out a cactus or two to put in my communal garden, and then wait for the flat’s management company to pass judgement (as they certainly didn’t like my bird station), and I would have loved to see Iris’s face if I had put two of the Willy Wonka ice-cream cones at either side of the end of the bed in my guest room, but not even my humongous shoplifting bag, as Marc calls, it could have covered them in my attempt to look inconspicuous and innocent. http://www.furniturepresentations.com/
Sunday, 5 February 2017
Red Snowflake Tags
The finished tags measure approximately 3ins x 2.ins.
I cut out the tags using the corrugated Kraft card, then attached smaller wooden tags to them using red and white Butchers twine and a wooden bead
The wooden red snowflakes were Christmas parcel tags from Sainsburys. They were glued to the wooden tag using PVA glue, and then the tag was edged with faux stitching using a red gel pen.
What I do with all my stuff I make ……..????
Susan asked what I will be doing with all the things I make, especially now that I don’t work and no longer have the staffroom table to display my wares. Well Susan, the café I like to take Iris on a Wednesday for her scrambled egg on toast is hoping to diversify and have a little crafty section as a side line, so I am going to take a small selection of bits to see how they go, but I really don’t want to start making “en masse”. I was also asked before Christmas if I would like a stall at a craft fayre, sadly, I had to decline as I had absolutely nothing to sell, so all the Christmas stuff I will be making in the coming months, cards, tags etc. will be put away just in case it I am asked again.
I shall also be going backwards and forwards to nursery from April onwards to collect Iris when Laura returns to work, so I will be keeping my ears open for any other opportunities, but again, I have no desire to make dozens of the same thing. I use a lot of my stuff myself, and I give quite a bit away too like a box of birthday cards as a present. As a “retired” lady I don’t want the hassle of making stuff to order or in bulk, I get bored easily these days, so making ten of anything would really be enough for me. I suppose it’s the making I like, working to a tight budget, followed by the blogging and sharing ……. selling isn’t that much of a priority at the moment.
Saturday, 4 February 2017
Wooden Snowflake Kraft Tags
To make these snowflake tags I have used scraps of corrugated and plain Kraft card, wooden snowflake embellishments, Dovecraft North Pole sentiment toppers, clear flat back gems, rustic style string, and wooden beads.
First I cut out the tags, the corrugated card one slightly bigger than the plain Kraft one. I punched a matching hole through them both and then joined them together with a length of rustic string and a wooden bead.I faux stitched the top tag with a white gel pen.
The wooden snowflakes were then added using PVA glue, followed by a clear flat backed gem in the centre, a scattering of white dots here and there to bring the design together. I also faux stitched the back of the completed tag with white gel pen to follow through the detail.
Subscribe to:
Posts (Atom)