Tiny Die Cut Gingerbread House Christmas Tree Decorations Favours

Following on from yesterday I had another go with my little house die …….

…….. yesterdays houses were sweet but a little plain  …….. but these Gingerbread Houses are much more like it!

Again, no great shakes to them. I cut the houses out of a Kraft type card with some trepidation, as I wasn’t sure how it would stand up to the white Dovecrafts 3D Enamel Effects I used for the “icing”.  Nothing fancy, it didn’t take that long as, like yesterdays houses these are probably disposable, so no stressing about perfect lines or squiggles etc.

The card curled a little, but I have since ordered some “proper” brown card from eBay as I definitely know I want to make a few more.  But, oh my goodness the price of card, it’s been a couple of years since I last needed to order any, I can’t believe how the price has gone up!

I put two Elizabeth Shaw mints in each house before gluing the roofs with Pritt stick as it tends to stick and hold together pretty fast with the help of a small peg for a minute or two.

The final touch was adding a red, flat back, gem heart to the middle of the “enamelled” one on the front of the houses plus a gold hanging thread. 

I’m sooooooo chuffed with how these have turned out  …….

…….. I wonder if pastel coloured chalets with snowy roofs would work half as well ?

Christmas House Tree Decorations – Elizabeth Shaw Mint Favours

I very rarely buy cutting dies these days, but I am still a sucker for the odd box die and I fell for this one below.   (Photo not mine)

Found on eBay (China) I paid £3.40 for it (inc. P & P). It’s currently available for £4.19, but I think I may have made a cheeky offer for it, which was accepted. https://www.ebay.co.uk/itm/353254753796.

I knew the die was going to be small, so didn’t have a clue what I was going to do with it, until it arrived a couple of weeks later………

…….. to find that it was perfect to hold just two Elizabeth Shaw mints, which I had already bought in bulk a little while ago when they were on offer, using them was a no brainer.

To be honest there really isn’t an awful lot to them ……..I simply cut the shapes using white glitter card, not the best choice, as it was quite tough to cut and then push all the tiny bits out of, aghhhhh and then it’s not the most brilliant card to glue using a glue gun, so if I make any more, I might just use a plain card to cut out all the extra faff.

After everything was glued together I decided to add an iridescent flat back star to give extra twinkle, with a gold thread to hang the house on the tree…. done and dusted.  Without the tag/thread the houses could also be used as table place setting perhaps?

I think there are all manner of variations I could make using this die, I am already thinking gingerbread houses ……… these white glitter houses are a bit plain, however, since they will be ripped apart in order to get the contents out, I don’t really want to invest that much time in them, if you know what I mean?

Happy Halloween Marc …….

Sorry, only this one tiny post this week, all my recent projects have been pretty big and have each largely taken up the best part of a week to complete and so I’ve not been able to build up a bank of scheduled posts (something I generally try to do) to tide me over the times I am away  ………

……because this week I am with Marc at the cottage! It’s probably the last time I’ll see him and Rick now, until goodness knows when in the New Year, so I’ve come armed for Halloween plus two bulging red pillowcases full of Christmas tut, which I’ve told them to put away safe, not to forget and NO peeping ………

I’m not sure if we’ll be doing any crafting, but I have also bought along another box of wooden Jenga type blocks (they cost me 50p for a box of 57!), so we can at least busy ourselves painting them, while we gossip and Marc inspires me with new ideas etc.  The blocks will then hopefully be ready to turn into more snowman decorations to randomly drop off around Evesham during December.  

And the pumpkin pictures? Well, you know Marc loves anything of a knitted persuasion and we both desperately miss my old colleague, the PE Lady and her knitting, from my school working days, so when I saw these pumpkins in the Cancer Research shop in Worcester (£1 each) I knew exactly who would love one!

Hopefully there’ll be a post next week, if only to tell you what Marc and I got up to, but I also have Iris and Bertie’s traditional Halloween sleepover as soon as I get back, so again it might only be a very short post …….. my apologies again.

Guest Crafters – Iris, Her Dad & “Their” School Homework

Iris had to make some sea creatures as part of a school homework project and I thought Tom’s comment on Facebook might make you smile ……

…….. helping to fill what would otherwise have been a “nothing to post” day.

I tell you what, that girl can rock a flat back gem ………..

As for the dolphins (?) faces ………

They just make me beam!  And, I wonder who taught her to use two different sized googly eyes for comical effect?  That’s my girl!

Mini Christmas Gonk Brooches/Badges

I can’t exactly say I like “gonks”, there’s been a craze, bordering on an obsession for them on one or two of the Facebook store pages I follow that I just don’t get, however when I saw this pack of 4 tree decoration gonks  in Poundstretcher (£3.49 per box) I thought I would get a pack for Marc and I as a joke ………

Then I got to thinking …….. could I make little brooches/badges with them? They would look so cute on Iris and Bertie’s coats in the run up to Christmas.

No great shakes here, all I did was glue gun (sewing didn’t really work) a 25mm brooch bar finding on the back of the gonks  ……….

…… and a tiny silver nail art heart on their hats and they were good to go. Needless to say I was back up to Poundstretcher the next day, I wanted to make some more and Marc thought he could make a small, festive something for his “girls” to make them smile.

To “present” them I would simply attach them to a white card square, adding a little doodling round the edges and pop them in a small cello bag....... voila!

New Decopatch Coffee Table

I have been looking for a small coffee type table for a while now after deciding that I would like to change where I put my Halloween and Christmas tree this year, however I am mean and my budget was no more than £5 - £7 especially after I found my beautiful computer/console table for £3.  I was having no luck at all …….

….. when low and behold I spotted this, going free outside a house on the school run, well it was a no-brainer, with Iris and Bertie now well versed in Nanny’s strange ways!

To be honest there was not an awful lot to it.  I simply painted the table all over with the same emulsion paint that I had used on my desk and shelf unit, to give  a sort of symmetry going to the room.  I painted the legs three times, but didn’t bother with the sides and top again as they would be the parts that were going to be Decopatched.  I already had all the Decopatch papers from a while back.

The Decopatching didn’t take that long, perhaps an hour and a half at the most, and as always it felt enormously relaxing.

Then followed goodness knows how many coats on the top, sides and legs of Wilko Quick Drying Clear Gloss Varnish, which really does dry really quickly and then it was done.

It looks pretty good, if I might say so in its new spot and the colours, spookily enough, are more or less the same as my Christmas baubles ……….. happy days!

Whimsical Painted Whatnot Stand

I need help ...... having only just recovered from finally finishing my turquoise shelves and finding a small table for free (for my Christmas tree), why do I then go out and get yet piece of furniture for yet another fiddly diddly project ............

Marc will throttle me, because I looked at this little stand twice, and twice left it in the shop for a couple more weeks, only to start thinking about it again before finally deciding that at only £1.99 (I know ......) it was a good buy! 

When I returned to the charity shop for the third time, I couldn’t see it and thought well, that served you right, but then I saw it had been used to display some shoes …….. but was still for sale, so a considered purchase was made.

When I got home I immediately started to get to work. I wanted to turn it into something really different and as far out of my comfort zone as I could go.  First I had to dismantle it into a pile of bits which was really easy, but then I realised that this was going to be quite a fiddly project!

The stand was a really dark faux wood which meant that it needed to be painted white, before I could really add any colour.  I applied two coats of white emulsion.  I guess I should have used a primer, but I was impatient (...... and I didn’t have any!).

The top shelf had a faux leather insert which made it easy to work out where to place thin strips of black paper all the way around.

I didn’t want to go down my usual Decopatch route, instead I chose to use patterned papers from these Origami stacks (The Works)  as the paper is quite thin and the colours are bright, although they don’t look it in these pictures.

Then I went the whole hog, and added the dots, made using a hole punch so that they would all be the same size.

It was then that I started to wonder where the inspiration for this idea had come from, I must have seen something, somewhere, probably Pinterest, to trigger it all.  I did quite a few Google searches using different words then stumbled upon “whimsical painted furniture” by accident and then it all became clear, that’s what I was trying to “do” in my own way.  Oh my goodness, some is just absolutely stunning …….. would that I had a steady hand to do all the intricate patterns of some examples.

The bottom shelf didn’t have a differentiated centre like the top, so I just carefully measured and then drew some lines so I could do the same thing all over again, but this time with an orange patterned paper.

Once this was done I could start on the legs of the stand …….

……. using black Sharpie pens to do a very rough checkboard pattern on bits here and there. I had to use Sharpie pens as my hands are not steady enough to paint anything as small as this.  

I only had a spot of turquoise emulsion paint to start colouring the legs so had to sit back for a day or two while I waited for a selection of brightly coloured tester pots to arrive from Wilko online.

Using the new set of colours, I began to paint the legs in small sections, making the combinations up as I went along, waiting for each coat to dry.  It took two coats (on top of the two coats of white) to get an even colour.

I found I was getting more confident and adventurous as I went along, however as I just couldn’t be exact with my line levels, I varied the length of each colour stripe in an effort to hid my failings.  I also found that a black Sharpie pen line also hid the same failings. When all the painting was done there followed another break, as my supply of “juicy” Sharpies ran to a screaming halt ……. so a trip to the shops of Worcester (as a huge treat to myself ensued).

In the meantime I applied two coats of varnish to the spindles as it made using a Sharpie pen on the paintwork a lot easier. However, when the pens arrived things began to go a bit wrong, I over embellished, getting carried away by adding too many doodles, that offered nothing, other than looking  bitty and totally unconnected.

However despite this I decided to carry on and put the stand back together to really access the damage ........

It's not right ..................

......... I am going to live with it for a week or two, as I have other things on the go ..........

......... but then the squiggles, diddles will be covered over with bolder black lines and spaces filled in, which will hopefully fix it ....... if not, it's back to the drawing board!

So two days later ..................

I am so much happier, repainting most of the parts was a pain, but well worth it I think. 

The legs need varnishing again now, but that really helps make the colours pop and it won't take that long using quick drying varnish.